Metasploit Pro is an exploitation and vulnerability validation tool that helps you divide the penetration testing workflow into manageable sections. While you can set up your own workflow, listed below is a typical workflow to help you get started.

The steps are typically:

  1. Create a Project
  2. Get Target Data
  3. View and Manage Host Data
  4. Run a Vulnerability Scan
  5. Set Up a Listener
  6. Exploit Known Vulnerabilities
  7. Post-Exploitation and Collect Evidence
  8. Clean Up Sessions
  9. Generate a Report
shadowsock r官网安卓


A project contains the workspace, stores data, and enables you to separate an engagement into logical groupings. Oftentimes, you will have different requirements for the various subnets in an organization. Therefore, it may be efficient to have multiple projects to represent those requirements.

For example, you may want to create a project for the human resources department and another project for the IT department. Your requirements for these departments may vary greatly, so it would be logical for you to separate the targets into different projects. At the end of the engagement, you can generate separate reports for each department to perform a comparative analysis and present your findings to the organization.

Creating a project is easy. You can click on the New Project button on the Projects page or you can select Project > New Project from the global toolbar.


When the New Projects page appears, you only need to provide a project name. If you want to customize the project, you can also add a description, specify a network range, and assign user access levels.

Want to learn more about projects? Check out this page.


The next thing you want to do is add data to your project. There are a couple of ways you can do this:

  • Run a discovery scan
  • Import data you already have


Scanning is the process of fingerprinting hosts and enumerating open ports to gain visibility into services running within a network. Scanning enables you to identify the active systems with services that you can communicate with so that you can build an effective attack plan. Metasploit has its own built-in discovery scanner that uses Nmap to perform basic TCP port scanning and gather additional information about the target hosts .

By default, the discovery scan includes a UDP scan, which sends UDP probes to the most commonly known UDP ports, such as NETBIOS, DHCP, DNS, and SNMP. The scan tests approximately 250 ports that are typically exposed for external services and are more commonly tested during a penetration test.

During a discovery scan, Metasploit Pro automatically stores the host data in the project. You can review the host data to obtain a better understanding of the topology of the network and to determine the best way to exploit each target. Oftentimes, the network topology provides insight into the types of applications and devices the target has in place. The more information that you can gather about a target, the more it will help you fine-tune a test for it.

Running a discovery scan is simple. From within a project, click the Scan button.

shadowsock r

When the New Discovery Scan form appears, enter the hosts you want to scan in the Target addresses field. You can enter a single IP address, an IP range described with hyphens, or a standard CIDR notation. Each item needs to appear on a newline.

BLACK PAPER XYZ: 2021 Free Shadowsocks Accounts:2021-1-19 · Usually, SS(R) only supports Android and Windows. shadowsocksR安卓下载地址 Update: It is a pity that breakwa11 decided to stop maintaining her shadowsocksR project because of some reasons. So if you have SSR on your phone, never delete it because there will be no official link on Github for you to download it again.

Want to learn more about discovery scans? Check out this page.


If you are using a vulnerability scanner, you can import your vulnerability report into a Metasploit project for validation. The imported vulnerability data also includes the host metadata, which you can analyze to identify additional attack routes. Metasploit supports several third-party vulnerability scanners, including Nessus, Qualys, and Core Impact.

You can also export and import data from one Metasploit project into another. This enables you to share findings between projects and other team members.

To import data into a project, click the Import button located in the Quick Tasks bar. When the Import Data page appears, select either the Import from Nexpose or Import from File option. Depending on the option you choose, the form displays the options you need to configure to import a file.

For example, if you choose to import from Nexpose, you will need to choose the console you want to use to run a scan or import a site. If you choose to import a file, you will need to browse to the location of the file.

To see a full list of supported import types or to learn more about importing, check out this shadowsockr安卓客户端百度云盘.


You can view host data at the project level or at the host level. At the project level, Metasploit provides a high-level view of all hosts that have been added to the project. To access the project view, select Analysis > Hosts. The project view initially shows the Hosts list, which displays the fingerprint and enumerated ports and services for each host. You can also view all the notes, services, vulnerabilities, and captured data for the project. To access these other views, click on their tabs from the project view.

To view the granular details for a host, you can click the host's IP address to access the single host view. This is a good way to drill down to see the vulnerabilities and credentials for a particular host.


After you add target data to your project, you can run a vulnerability scan to pinpoint security flaws that can be exploited. Vulnerability scanners leverage vulnerability databases and checks to find known vulnerabilities and configuration errors that exist on the target machines. This information can help you identify potential attack vectors and build and attack plan that will enable you to compromise the targets during exploitation.

The integration with Nexpose enables you to launch a vulnerability scan directly from the Metasploit web interface. A Nexpose scan identifies the active services, open ports, and applications that run on each host and attempts to identify vulnerabilities that may exist based on the attributes of the known services and applications. Nexpose discloses the results in a scan report, which you can share with Metasploit for validation purposes.

To run a Nexpose scan, click the Nexpose button located in the Quick Tasks bar.

When the Nexpose configuration form appears, you need to configure and select the console you want to use to perform the scan. Similarly to a discovery scan, you need to define the hosts you want to scan. You'll also need to choose one of the available scan templates, which defines the audit level that Nexpose uses. For more information on scan templates, check out the Nexpose documentation.

To view all potential vulnerabilities that found by Nexpose, select shadowsock r官网安卓. You can click on the vulnerability name to view the modules that can be used to exploit the vulnerability.


【 Shadow socks 】Shadow socks(伋理上网工具)新版下载 ...:2021-6-22 · 软件介绍 ShadowSocks,是一款伋理服务器科学上网工具,号称科学上网之瑞士军刀!Shadowsocks是一款可协助网友畅游网络的客户端小工具,功能非常强大,需要注意的是它需要服务器端配合才能发挥作用,你需自行搭建服务器端程序,配置好IP和 ...

Vulnerability scanners are useful tools that can help you quickly find potential security flaws on a target. However, there are times when you may want to avoid detection and limit the amount of noise you create. In these cases, you may want to run some auxiliary modules, such as the FTP, SMB, and VNC login scanners, to manually identify potential vulnerabilities that can be exploited. Manual vulnerability analysis is considerably more time consuming and requires research, critical thinking, and in-depth knowledge on your part, but it can help you create an accurate and effective attack plan.


The easiest way to scan and check for vulnerabilities is through the Vulnerability Validation Wizard, which automates the validation process for Nexpose and Metasploit Pro users. The wizard provides a guided interface that walks you through each step of the validation process­—from importing Nexpose data to auto-exploiting vulnerabilities to sending the validation results back to Nexpose.

If you don't have access to Nexpose and/or Metasploit Pro, the validation process requires manual analysis of the vulnerabilities. Manual validation requires a bit more legwork, but provides much more control over the vulnerabilities that are targeted.

For more information on vulnerability validation, check out this page.


After you have gathered information about your targets and identified potential vulnerabilities, you can move to the exploitation phase. Exploitation is simply the process of running exploits against the discovered vulnerabilities. Successful exploit attempts provide access to the target systems so you can do things like steal password hashes and download configuration files. They also enable you to identify and validate the risk that a vulnerability presents.

ShadowsocksR 客户端 各种隐藏使用技巧说明 - 长沙SEO霜天:2021-4-13 · 我的SSR客户端的全局模式一点也没有全部转发TCP流量的样子,我感觉是不是我设置错了。在我看来设置全局模式应该所有走伋理,可是我打开一个国内视频网站,连接统计流量不怎么涨,连接数 …


The auto-exploitation feature cross-references open services, vulnerability references, and fingerprints to find matching exploits. All matching exploits are added to an attack plan, which basically identifies all the exploits that are can be run. The simple goal of auto-exploitation is to get a session as quickly as possible by leveraging the data that Metasploit has for the target hosts.

To run auto-exploitation, click the Exploit button located in the Quick Tasks bar.

At a minimum, you'll need to provide the hosts you want to exploit and the minimum reliability for each exploit. The minimum reliability can be set to guarantee the safety of the exploits that are launched. The higher the reliability level, the less likely the exploits used will crash services or negatively impact a target. For a description of each module ranking, check out this page.check out this page.

Manual Exploitation

Manual exploitation provides a more targeted and methodical approach to exploiting vulnerabilities. It enables you to run select individual exploits one at a time. This method is particularly useful if there is a specific vulnerability that you want to exploit. For example, if you know that the SMB server on a Windows XP target does not have the MS08-067 patch, you may want to try to run the corresponding module to exploit it.

To search for modules, select Modules > Search and enter the name of the module you want to run. The best way to find an exact module match is to search by vulnerability reference. For example, if you want to search for ms08-067, you can either search for 'ms08-067'. You can also search by the module path: exploit/windows/smb/ms08_067_netapi.

One of the easiest ways to find an exploit for a vulnerability is directly from the vulnerability page. To view all vulnerabilities in the project, select Analysis > Vulnerabilities. You can click on the vulnerability name to view the related modules that can be used to exploit the vulnerability.

shadowsock r

The single vulnerability view shows a list of the exploits that can be run against the host. You can click the Exploit button to open the configuration page for the module.

shadowrocket apk

shadowrocket apk

Each module has its own set of options that can be customized to your needs. There are too many possibilities to list here. However, here are some options that are commonly used to configure modules:

  • Payload Type - Specifies the type of payload that the exploit will deliver to the target. Choose one of the following payload types:
    • shadowsockr安卓客户端百度云盘 - A command execution payload that enables you to execute commands on the remote machine.
    • Meterpreter - An advanced payload that provides a command line that enables you to deliver commands and inject extensions on the fly.
  • Connection Type - Specifies how you want your Metasploit instance to connect to the target. Choose one of the following connection types:
    • Auto - Automatically uses a bind connection when NAT is detected; otherwise, a reverse connection is used.
    • Bind - Uses a bind connection, which is useful when the targets are behind a firewall or a NAT gateway.
    • Reverse - Uses a reverse connection, which is useful if your system is unable to initiate connections to the targets.
  • LHOST - Defines the address for the local host.
  • LPORT - Defines the ports that you want to use for reverse connections.
  • RHOST - Defines the target address.
  • RPORT - Defines the remote port you want to attack.
  • shadowsockr安卓客户端4.7.4 - Specifies the target operating system and version.
  • shadowsockr安卓客户端 - Defines the timeout in minutes.

Post-Exploitation and Collecting Evidence

Any exploit that successfully takes advantage of a vulnerability results in an open session you can use to extract information from a target.The real value of the attack depends on the data that you can collect from the target, such as password hashes, system files, and screenshots and how you can leverage that data to gain access to additional systems.

To view a list of open sessions, select the Sessions tab. Click on the session ID to view the post-exploitation tasks that can be run against the host.


To collect evidence from an exploited system, click the Collect button.

shadowsock怎么配置-百度经验:2021-11-7 · shadowsock怎么配置,可伍帮助我伊阅读外文文献,但很多人还不知道怎么配置。其实很简单 该经验图片、文字中可能存在外站链接或电话号码等,请注意识别,谨防上当受骗!

Bruteforcing and Reusing Passwords

One of the most popular ways to gain access to a target is through the use of password attacks. You can conduct password attacks by using shadowsockr安卓客户端 github or Reusing Credentials.

Cleaning Up Sessions

When you are done with an open session, you can clean up the session to remove any evidence that may be left behind on the system and to terminate the session. To clean up a session, go to the Sessions page and click the Cleanup button.

When the shadowsockr安卓客户端百度云盘 page appears, select the sessions you want to close and click the Cleanup Sessions button.

Generating a Report

搬瓦工教程-搭建shadowsocks科学上网 | reizhi:2021-9-25 · 紧接上一篇教程,本篇将为大家介绍在搬瓦工 VPS 搭建 shadowsocks 科学上网的方法。相比于 SSH 转发,shadowsocks 支持多线程并且资源占用更低,安全性更好。在这里我伊选择的版本是 shadowsocks-libev,在 64M VPS 上足够支持个人使用。而 ...

Getting Started